Open and close valves without being there.
A remote solenoid driver with custom timers, schedules, and trigger automation — for drip lines, micro-irrigation, zone control, and every valve you'd rather not drive to twice a day.
60-day money-back guarantee and a one-year warranty on every sensor.
Irrigation valves are the definition of a two-trip chore: drive out to open them, drive back to close them, every cycle, all season. A remote controller collapses that to a tap — and schedules collapse the tap to nothing.
With the pump controller and tank sensors on the same platform, the pieces coordinate: the pump fills on level, the valves route on schedule, a rain gauge can hold the watering when the sky does it for you — and you watch it all from the same app that shows every level on the place. The full picture of what connects to what is on the water system automation page.
Zone control from your pocket
Open one zone, close another, shift water between storages — from the truck, the house, or three states away.
Schedules that hold
Custom timers and daily windows run the routine automatically; you step in only when the plan changes.
Trigger automation
Valves can act on triggers from the platform — pair with levels and schedules so water moves when conditions say so, not when someone remembers.
Fit the solenoid
The controller drives a solenoid valve — it works with any pipe size, matched to your plumbing.
Set the plan
Timers, schedules, and triggers configured in the same dashboard as your sensors.
Water moves on command
Open, close, and automate remotely, with your zones' state visible in the app.
Watch them work together
When it rains, the sprinklers already know.
The rain gauge measures what actually fell — and because it shares a platform with the valve controller, that measurement can hold your irrigation. You stop paying to water in the rain, and where watering is restricted after rainfall, the rule follows the reading. Sped up:
Sped-up example — you set the rainfall threshold and the schedule in the Meterra app. The 0.008 in tipping-bucket resolution means the rule acts on real measured rain at your site, not a forecast.
The products in this simulation
Every device reports to the same Meterra dashboard and app.
Send us your site details and we'll send back pricing and the right setup.
| Control | Remote open/close, custom timers and schedules, trigger automation |
|---|---|
| Compatibility | Solenoid driver — works with any pipe size |
| Applications | Drip, micro-irrigation, zone control, storage-to-storage transfer |
| Enclosure | IP67 weatherproof |
| Connectivity | Verizon NB-IoT cellular (coverage confirmed for your location) |
| Compliance | FCC compliant |
| Connectivity plan | 3 months included, then from $10/month per device (discounts on annual subscriptions) |
Price includes the sensor and 3 months of connectivity. US connectivity plans from $10/month per device after the bundled period; discounts on annual subscriptions.
How do I get US pricing?
US pricing for valve controllers is being finalized as part of our rollout. Tell us the valves and zones you want to control and we'll reply within one business day with pricing and the right configuration.
Does it work with my existing valves?
The controller drives solenoid valves and isn't tied to a pipe size — most drip, micro-irrigation, and zone setups are covered. Tell us what's plumbed and we'll confirm the right solenoid arrangement before anything ships.
Can it work together with the pump controller and tank sensors?
Yes — controllers and sensors share one platform, so schedules and triggers can coordinate. The pump fills on tank level while valves route the water on your timers and rules.
A practical place to start
Request pricing & availability
Share a few details and we’ll recommend the simplest setup that fits your operation—along with clear pricing and coverage information.
