Straight from the field
Pressure level sensor and the cable lengths available
The Meterra submerged pressure level sensor and its cable lengths, from the standard 10 ft trough cable to pond and dam runs long enough to reach the shoreline.
The submerged pressure sensor is built with the cable length the site needs: a few feet for a stock trough, on up to any length to about 330 ft (100 m) for ponds and dams. Length is not only a depth question. A longer cable also lets the sensor sit where the water actually needs watching, out in the middle of a pond or over in a problem corner, while the communication box stays back on dry ground. Depth is covered too: the Dam Level Monitor reads open water to about 330 ft (100 m). Every length reports to the same dashboard and app, with low-level alarms and history included.
